product description:

        REFLEX series of three-way speaker provides a two-way unit speaker does not have many advantages, dedicated frequency horn so that the intermediate frequency sound pressure transmission speed to optimize, greatly improving the sound quality of the resolution and clarity. Far more than the traditional 10 ", 12" and 15 "2 frequency low-frequency speaker performance.More you are unexpected is that this special IF unit omitted the adjustment process of high frequency, the formation of more natural and vigorous, smooth Tone, while simplifying the low frequency unit of other frequency control, optimize the bass manufacturing parameters, without weakening the perfect output of the midrange band.

 

  To ensure the stability of the project, the three-frequency circuit of the material is practical, rigorous design.

DOMUS Tin Tin REFLEX Series Tri-Unit Design Speaker offers two-way unit speakers without

Of the many advantages of dedicated IF unit to make the intermediate frequency sound pressure transmission speed to optimize, greatly improved

The sound quality of the resolution and clarity. This small and lightweight IF unit makes the intermediate frequency manufacturing more

Accurate, far more than the traditional 10 ", 12" and 15 "2 frequency low frequency speaker performance.

Unexpectedly, this dedicated IF unit omits the regulation of the high frequency, forming a more natural

Vigorous, smooth tone, while simplifying the low frequency unit control of other frequencies, optimized bass

Manufacturing parameters, without weakening the perfect output of the midrange band.

 

REFLEX series speakers in the same grade speaker alone side! The Can perform more brilliant performance for the performers!

  

Optimize the wavefront design, firing a single wavefront acoustic wave, the horn design combines high frequency and intermediate frequency as a whole, with excellent phase and smooth frequency response, which means that the audience gets a more balanced midrange. So that the speaker display has a good fidelity and beam pattern, regeneration of a clear, no sound of the sound source.

Introduction to RFX - 3150

● The box is made of solid imported birch plywood, the surface is sprayed with resin coating

● Large-diameter iron mesh on the back of the acoustic sound through the sponge, blocking dust and water droplets on the speaker unit intrusion at the same time has a good sound rate

● box configuration multi-point hanging device, installation light and simple, easy adjustment of the sound axis

● The bottom of the speaker is equipped with a support pole for easy temporary application

● The input interface is a four-core SPKON standard input jack

● The appearance of exquisite and strong, designed for the sound synthesis requirements of relatively high places

● die-cast aluminum frame 15-inch 60-core woofer

● Horn load of 1.75-inch throat 44-core titanium alloy diaphragm compression drive

● Die-cast aluminum frame 6.5-inch 35-pin midrange unit

● To ensure safe operation of the system, be sure to remove the low frequency components below 35 to 40 weeks

Specification

Model type single 15-inch three-frequency full-range loudspeaker system

Maximum input power (RMS) 600 W

Frequency response 40 Hz - 20k Hz (+/- 3 dB)

Nominal impedance 8 Ω

Sensitivity (1w / 1m) 98dB

Continuous sound pressure level (1w / 1m) 114dB

Maximum sound pressure level (1w / 1m) 124dB

Specifications

Product size (mm) 462 (width) x 520 (deep) x815 (high)

Packing size (mm) 527 (long) x 605 (deep) x895 (high)

Net weight 27KG

Configure Configuration

Unit specifications LF: 15 "x1, MF: 6.5" x1, HF: 1.75 "Driver x1

Box material imported birch plywood

Lifting system hanging more

Face plate 1.5mm perforated Anshan steel plate

Input Interface Neutrik NL4MP x 2

            Appearance color black granular environmental water spray (default)