Introduction to DP - 6100

● The box is made of solid imported birch plywood, the surface is sprayed with resin coating

● Large-diameter iron mesh on the back of the acoustic sound through the sponge, blocking dust and water droplets on the speaker unit intrusion at the same time has a good sound rate

● box configuration multi-point hanging device, installation light and simple, easy adjustment of the sound axis

● The bottom of the speaker is equipped with a support pole for easy temporary application

● The input interface is a four-core SPKON standard input jack

● The appearance of exquisite and strong, designed for the sound synthesis requirements of relatively high places

● Die-cast aluminum frame 10-inch 50-core woofer

● Horn load of 1.3-inch throat 44-core titanium diaphragm compression drive

● To ensure safe operation of the system, be sure to remove sub-low frequency components for 40 to 50 weeks or less.

Technical Specification

System Type: 10″, 2-way, bass-reflex

Frequency Range (-10 dB)1 : 50 Hz - 20 KHz

Frequency Response (±3 dB)1 : 85 Hz - 20 KHz

System Sensitivity (1w @ 1m)1 : 95 dB

Nominal Impedance: 8 ohms

Maximum SPL: 122 dB (128 dB peak)

Power Rating2 : (Continuous/Program/Peak) 250 W/500 W/1000 W

Coverage Pattern: 70° x 100° (H x V)

Physical: Dimensions (H x W x D): 533 mm x 300 mm x 340 mm 21.0 in x 11.8 in x 13.4 in

Net Weight: 14.9 Kg (32.6 lbs)

LF Driver: 1 x 10 inch woofer, 2.5 inch voice coil, ferrite magnet

HF Driver: 1 x compression driver, 1.5 inch voice coil, ferrite magnet

Input Connectors: 2 x Neutrik® Speakon® NL4MP

Enclosure Construction: Trapezoid, 15 mm, plywood

Enclosure Color: Black

 

Introduction to DP - 6120

● The box is made of solid imported birch plywood, the surface is sprayed with resin coating

● Large-diameter iron mesh on the back of the acoustic sound through the sponge, blocking dust and water droplets on the speaker unit intrusion at the same time has a good sound rate

● box configuration multi-point hanging device, installation light and simple, easy adjustment of the sound axis

● The bottom of the speaker is equipped with a support pole for easy temporary application

● The input interface is a four-core SPKON standard input jack

● The appearance of exquisite and strong, designed for the sound synthesis requirements of relatively high places

● Die-cast aluminum frame 12-inch 75-core woofer

● Horn load of 1.3-inch throat 44-core titanium diaphragm compression drive

● To ensure safe operation of the system, be sure to remove the low frequency components below 35 to 40 weeks.

Technical Specification

System Type: 12″, 2-way, bass-reflex

Frequency Range (-10 dB)1 : 47 Hz - 20 KHz

Frequency Response (±3 dB)1 : 80 Hz - 20 KHz

System Sensitivity (1w @ 1m)1 : 97.5 dB

Nominal Impedance: 8 ohms

Maximum SPL: 125 dB (131 dB peak)

Power Rating2 : (Continuous/Program/Peak) 400 W/800 W/1600 W

Coverage Pattern: 70° x 100° (H x V)

Physical: Dimensions (H x W x D): 600 mm x 360 mm x 382 mm 23.6 in x 14.2 in x 15.0 in

Net Weight: 20.2Kg (40.7 lbs)

LF Driver: 1 x 12 inch woofer, 2.5 inch voice coil, ferrite magnet

HF Driver: 1 x  compression driver, 1.5 inch voice coil, ferrite magnet

Input Connectors: 2 x Neutrik® Speakon® NL4MP

Enclosure Construction: Trapezoid, 15 mm, plywood

Enclosure Color: Black

 

Introduction to DP - 6150

● The box is made of solid imported birch plywood, the surface is sprayed with resin coating

● Large-diameter iron mesh on the back of the acoustic sound through the sponge, blocking dust and water droplets on the speaker unit intrusion at the same time has a good sound rate

● The bottom of the speaker is equipped with a support pole for easy temporary application

● The input interface is a four-core SPKON standard input jack

● The appearance of exquisite and strong, designed for the sound synthesis requirements of relatively high places

● 15-inch woofer of die-cast aluminum frame

● Horn load of 1.3-inch 44-core throat titanium alloy diaphragm compression drive

● Wide band, can be independently applied to a variety of high-end decoration or installation space is small, require a higher sound pressure and sound requirements of a high place,

● such as small Di, senior conference hall. With the combination of subwoofer system, you can get a better sound playback

● To ensure safe operation of the system, be sure to remove the low frequency components below 35 to 40 weeks.

 

Technical Specification

System: System Type: 15″, 2-way, bass-reflex

Frequency Range (-10 dB)1 : 45 Hz - 20 KHz

Frequency Response (±3 dB)1 : 75 Hz - 20 KHz

System Sensitivity (1w @ 1m)1 : 99 dB

Nominal Impedance: 8 ohms

Maximum SPL: 127 dB (133 dB peak)

Power Rating2 : (Continuous/Program/Peak) 450 W/900 W/1800 W

Coverage Pattern: 70° x 100° (H x V)

Physical: Dimensions (H x W x D): 680 mm x 410 mm x 440 mm 26.8 in x 16.1 in x 17.3 in

Net Weight: 23.0 Kg (50.7 lbs)

LF Driver: 1 x 15 inch woofer, 3 inch voice coil, ferrite magnet

HF Driver: 1 x  compression driver, 1.5 inch voice coil, ferrite magnet

Input Connectors: 2 x Neutrik® Speakon® NL4MP

Enclosure Construction: Trapezoid, 15 mm, plywood

Enclosure Color: Black